/* * SPDX-FileCopyrightText: 2021-2026 Espressif Systems (Shanghai) CO LTD * * SPDX-License-Identifier: Apache-2.0 */ #pragma once #include "sdkconfig.h" #if CONFIG_OPENTHREAD_HEADER_CUSTOM #include CONFIG_OPENTHREAD_CUSTOM_HEADER_FILE_NAME #endif #define OPENTHREAD_FTD 1 /** * @def OPENTHREAD_CONFIG_PLATFORM_INFO * * The platform-specific string to insert into the OpenThread version string. * */ #ifdef OPENTHREAD_CONFIG_PLATFORM_INFO #error `OPENTHREAD_CONFIG_PLATFORM_INFO` is redefined. #endif #define OPENTHREAD_CONFIG_PLATFORM_INFO CONFIG_OPENTHREAD_PLATFORM_INFO /** * @def PACKAGE_NAME * * Define to the full name of this package. * */ #ifdef PACKAGE_NAME #error `PACKAGE_NAME` is redefined. #endif #define PACKAGE_NAME CONFIG_OPENTHREAD_PACKAGE_NAME /** * @def PACKAGE_STRING * * Define to the full name and version of this package. * */ #ifdef PACKAGE_STRING #error `PACKAGE_STRING` is redefined. #endif #define PACKAGE_STRING (PACKAGE_NAME " - " PACKAGE_VERSION) /** * @def OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE * * Configuration option to enable dynamic log level control. * */ #ifdef OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE #error `OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE` is redefined. #endif #define OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE CONFIG_OPENTHREAD_LOG_LEVEL_DYNAMIC /** * @def OPENTHREAD_CONFIG_LOG_LEVEL * * The log level (used at compile time). If `OPENTHREAD_CONFIG_LOG_LEVEL_DYNAMIC_ENABLE` is set, this defines the most * verbose log level possible. See `OPENTHREAD_CONFIG_LOG_LEVEL_INIT` to set the initial log level. * */ #ifdef OPENTHREAD_CONFIG_LOG_LEVEL #error `OPENTHREAD_CONFIG_LOG_LEVEL` is redefined. #endif #if CONFIG_OPENTHREAD_LOG_LEVEL_DYNAMIC #define OPENTHREAD_CONFIG_LOG_LEVEL OT_LOG_LEVEL_DEBG #else #define OPENTHREAD_CONFIG_LOG_LEVEL CONFIG_OPENTHREAD_LOG_LEVEL #endif /** * @def OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS * * The number of message buffers in buffer pool */ #ifdef OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS #error `OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS` is redefined. #endif #define OPENTHREAD_CONFIG_NUM_MESSAGE_BUFFERS CONFIG_OPENTHREAD_NUM_MESSAGE_BUFFERS /** * @def OPENTHREAD_CONFIG_RADIO_LINK_TREL_ENABLE * * Set to 1 to enable support for Thread Radio Encapsulation Link (TREL). * */ #ifdef OPENTHREAD_CONFIG_RADIO_LINK_TREL_ENABLE #error `OPENTHREAD_CONFIG_RADIO_LINK_TREL_ENABLE` is redefined. #endif #if CONFIG_OPENTHREAD_RADIO_TREL #define OPENTHREAD_CONFIG_RADIO_LINK_TREL_ENABLE 1 #else #define OPENTHREAD_CONFIG_RADIO_LINK_TREL_ENABLE 0 #endif // CONFIG_OPENTHREAD_RADIO_TREL #if CONFIG_OPENTHREAD_RADIO_TREL /** * @def OPENTHREAD_CONFIG_TREL_USE_HEAP_ENABLE * * Set to 1 to allow TREL modules to use heap allocated objects (e.g. for the TREL peer table). * */ #define OPENTHREAD_CONFIG_TREL_USE_HEAP_ENABLE 1 #endif // CONFIG_OPENTHREAD_RADIO_TREL /** * @def OPENTHREAD_CONFIG_RADIO_LINK_IEEE_802_15_4_ENABLE * * Set to 1 to enable support for IEEE802.15.4 radio link. * */ #ifdef OPENTHREAD_CONFIG_RADIO_LINK_IEEE_802_15_4_ENABLE #error `OPENTHREAD_CONFIG_RADIO_LINK_IEEE_802_15_4_ENABLE` is redefined. #endif #if CONFIG_OPENTHREAD_RADIO_154_NONE #define OPENTHREAD_CONFIG_RADIO_LINK_IEEE_802_15_4_ENABLE 0 #else #define OPENTHREAD_CONFIG_RADIO_LINK_IEEE_802_15_4_ENABLE 1 #endif /** * @def OPENTHREAD_LIB_SPINEL_RX_FRAME_BUFFER_SIZE * * Specifies the rx frame buffer size used by `SpinelInterface` in RCP host code. This is applicable/used when * `RadioSpinel` platform is used. * */ #ifdef OPENTHREAD_LIB_SPINEL_RX_FRAME_BUFFER_SIZE #error `OPENTHREAD_LIB_SPINEL_RX_FRAME_BUFFER_SIZE` is redefined. #endif #define OPENTHREAD_LIB_SPINEL_RX_FRAME_BUFFER_SIZE CONFIG_OPENTHREAD_SPINEL_RX_FRAME_BUFFER_SIZE /** * @def OPENTHREAD_CONFIG_MLE_MAX_CHILDREN * * The maximum number of children. * */ #ifdef OPENTHREAD_CONFIG_MLE_MAX_CHILDREN #error `OPENTHREAD_CONFIG_MLE_MAX_CHILDREN` is redefined. #endif #define OPENTHREAD_CONFIG_MLE_MAX_CHILDREN CONFIG_OPENTHREAD_MLE_MAX_CHILDREN /** * @def OPENTHREAD_CONFIG_TMF_ADDRESS_CACHE_ENTRIES * * The number of EID-to-RLOC cache entries. * */ #ifdef OPENTHREAD_CONFIG_TMF_ADDRESS_CACHE_ENTRIES #error `OPENTHREAD_CONFIG_TMF_ADDRESS_CACHE_ENTRIES` is redefined. #endif #define OPENTHREAD_CONFIG_TMF_ADDRESS_CACHE_ENTRIES CONFIG_OPENTHREAD_TMF_ADDR_CACHE_ENTRIES #ifdef OPENTHREAD_CONFIG_COMMISSIONER_ENABLE #error `OPENTHREAD_CONFIG_COMMISSIONER_ENABLE` is redefined. #endif #if CONFIG_OPENTHREAD_COMMISSIONER /** * @def OPENTHREAD_CONFIG_COMMISSIONER_ENABLE * * Define to 1 to enable Commissioner support. * */ #define OPENTHREAD_CONFIG_COMMISSIONER_ENABLE 1 /** * @def OPENTHREAD_CONFIG_COMMISSIONER_MAX_JOINER_ENTRIES * * The maximum number of Joiner entries maintained by the Commissioner * */ #ifdef OPENTHREAD_CONFIG_COMMISSIONER_MAX_JOINER_ENTRIES #error `OPENTHREAD_CONFIG_COMMISSIONER_MAX_JOINER_ENTRIES` is redefined. #endif #define OPENTHREAD_CONFIG_COMMISSIONER_MAX_JOINER_ENTRIES CONFIG_OPENTHREAD_COMM_MAX_JOINER_ENTRIES #else // OPENTHREAD_CONFIG_COMMISSIONER_ENABLE #define OPENTHREAD_CONFIG_COMMISSIONER_ENABLE 0 #endif // CONFIG_OPENTHREAD_COMMISSIONER #ifdef OPENTHREAD_CONFIG_MAC_FILTER_ENABLE #error `OPENTHREAD_CONFIG_MAC_FILTER_ENABLE` is redefined. #endif #if CONFIG_OPENTHREAD_MACFILTER_ENABLE #define OPENTHREAD_CONFIG_MAC_FILTER_ENABLE 1 #else #define OPENTHREAD_CONFIG_MAC_FILTER_ENABLE 0 #endif #ifdef OPENTHREAD_CONFIG_JOINER_ENABLE #error `OPENTHREAD_CONFIG_JOINER_ENABLE` is redefined. #endif #if CONFIG_OPENTHREAD_JOINER #define OPENTHREAD_CONFIG_JOINER_ENABLE 1 #else #define OPENTHREAD_CONFIG_JOINER_ENABLE 0 #endif #ifdef OPENTHREAD_CONFIG_DIAG_ENABLE #error `OPENTHREAD_CONFIG_DIAG_ENABLE` is redefined. #endif #if CONFIG_OPENTHREAD_DIAG #define OPENTHREAD_CONFIG_DIAG_ENABLE 1 #else #define OPENTHREAD_CONFIG_DIAG_ENABLE 0 #endif #ifdef OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE #error `OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE` is redefined. #endif #if CONFIG_OPENTHREAD_SRP_CLIENT #define OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE 1 /** * @def OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES * * Specifies number of service entries in the SRP client service pool. * * This config is applicable only when `OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_ENABLE` is enabled. * */ #ifdef OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES #error `OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES` is redefined. #endif #define OPENTHREAD_CONFIG_SRP_CLIENT_BUFFERS_MAX_SERVICES CONFIG_OPENTHREAD_SRP_CLIENT_MAX_SERVICES #else #define OPENTHREAD_CONFIG_SRP_CLIENT_ENABLE 0 #endif // CONFIG_OPENTHREAD_SRP_CLIENT /** * @def OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE * * Define to 1 to enable DNS Client support. * */ #ifdef OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE #error `OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE` is redefined. #endif #define OPENTHREAD_CONFIG_DNS_CLIENT_ENABLE CONFIG_OPENTHREAD_DNS_CLIENT #ifdef OPENTHREAD_CONFIG_MAC_CSL_RECEIVER_ENABLE #error `OPENTHREAD_CONFIG_MAC_CSL_RECEIVER_ENABLE` is redefined. #endif #if CONFIG_OPENTHREAD_CSL_ENABLE /** * @def OPENTHREAD_CONFIG_MAC_CSL_RECEIVER_ENABLE * * Define as 1 to support Thread 1.2 CSL feature. * */ #define OPENTHREAD_CONFIG_MAC_CSL_RECEIVER_ENABLE 1 /** * @def OPENTHREAD_CONFIG_MAC_CSL_DEBUG_ENABLE * * Define as 1 to enable support Thread 1.2 CSL debug. * */ #ifdef OPENTHREAD_CONFIG_MAC_CSL_DEBUG_ENABLE #error `OPENTHREAD_CONFIG_MAC_CSL_DEBUG_ENABLE` is redefined. #endif #define OPENTHREAD_CONFIG_MAC_CSL_DEBUG_ENABLE CONFIG_OPENTHREAD_CSL_DEBUG_ENABLE #else #define OPENTHREAD_CONFIG_MAC_CSL_RECEIVER_ENABLE 0 #endif // CONFIG_OPENTHREAD_CSL_ENABLE /** * * Define as 1 to enable support for allocating message pool buffer in PSRAM * */ #ifdef OPENTHREAD_CONFIG_PLATFORM_MESSAGE_MANAGEMENT #error `OPENTHREAD_CONFIG_PLATFORM_MESSAGE_MANAGEMENT` is redefined. #endif #if CONFIG_OPENTHREAD_PLATFORM_MSGPOOL_MANAGEMENT /** * @def OPENTHREAD_CONFIG_PLATFORM_MESSAGE_MANAGEMENT * * The message pool is managed by platform defined logic when this flag is set. * This feature would typically be used when operating in a multi-threaded system * and multiple threads need to access the message pool. * */ #define OPENTHREAD_CONFIG_PLATFORM_MESSAGE_MANAGEMENT 1 #else #define OPENTHREAD_CONFIG_PLATFORM_MESSAGE_MANAGEMENT 0 #endif /** * @def OPENTHREAD_CONFIG_TIME_SYNC_ENABLE * * Define as 1 to enable the time synchronization service feature. * */ #ifdef OPENTHREAD_CONFIG_TIME_SYNC_ENABLE #error `OPENTHREAD_CONFIG_TIME_SYNC_ENABLE` is redefined. #endif #if CONFIG_OPENTHREAD_TIME_SYNC #define OPENTHREAD_CONFIG_TIME_SYNC_ENABLE 1 #else #define OPENTHREAD_CONFIG_TIME_SYNC_ENABLE 0 #endif /** * @def OPENTHREAD_CONFIG_RADIO_STATS_ENABLE * * Set to 1 to enable support for Radio Statistics. Note that this option only works for OPENTHREAD_FTD and * OPENTHREAD_MTD. * */ #ifdef OPENTHREAD_CONFIG_RADIO_STATS_ENABLE #error `OPENTHREAD_CONFIG_RADIO_STATS_ENABLE` is redefined. #endif #if CONFIG_OPENTHREAD_RADIO_STATS_ENABLE #define OPENTHREAD_CONFIG_RADIO_STATS_ENABLE 1 #else #define OPENTHREAD_CONFIG_RADIO_STATS_ENABLE 0 #endif /** * @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_TIMEOUT * * The timeout value (in seconds) waiting for a address notification response after sending an address query. * */ #ifdef OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_TIMEOUT #error `OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_TIMEOUT` is redefined. #endif #define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_TIMEOUT CONFIG_OPENTHREAD_ADDRESS_QUERY_TIMEOUT /** * @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_INITIAL_RETRY_DELAY * * Initial retry delay for address query (in seconds). * */ #ifdef OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_INITIAL_RETRY_DELAY #error `OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_INITIAL_RETRY_DELAY` is redefined. #endif #define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_INITIAL_RETRY_DELAY CONFIG_OPENTHREAD_ADDRESS_QUERY_RETRY_DELAY /** * @def OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_MAX_RETRY_DELAY * * Maximum retry delay for address query (in seconds). * */ #ifdef OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_MAX_RETRY_DELAY #error `OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_MAX_RETRY_DELAY` is redefined. #endif #define OPENTHREAD_CONFIG_TMF_ADDRESS_QUERY_MAX_RETRY_DELAY CONFIG_OPENTHREAD_ADDRESS_QUERY_MAX_RETRY_DELAY /** * @def OPENTHREAD_CONFIG_MAC_MAX_CSMA_BACKOFFS_DIRECT * * The maximum number of backoffs the CSMA-CA algorithm will attempt before declaring a channel access failure. * * Equivalent to macMaxCSMABackoffs in IEEE 802.15.4-2006, default value is 4. * */ #ifdef OPENTHREAD_CONFIG_MAC_MAX_CSMA_BACKOFFS_DIRECT #error `OPENTHREAD_CONFIG_MAC_MAX_CSMA_BACKOFFS_DIRECT` is redefined. #endif #define OPENTHREAD_CONFIG_MAC_MAX_CSMA_BACKOFFS_DIRECT CONFIG_OPENTHREAD_MAC_MAX_CSMA_BACKOFFS_DIRECT /** * @def OPENTHREAD_CONFIG_BORDER_AGENT_ENABLE * * Define to 1 to enable Border Agent support. * */ #ifdef OPENTHREAD_CONFIG_BORDER_AGENT_ENABLE #error `OPENTHREAD_CONFIG_BORDER_AGENT_ENABLE` is redefined. #endif #if CONFIG_OPENTHREAD_BORDER_AGENT_ENABLE #define OPENTHREAD_CONFIG_BORDER_AGENT_ENABLE 1 #else #define OPENTHREAD_CONFIG_BORDER_AGENT_ENABLE 0 #endif /** * @def OPENTHREAD_CONFIG_PARENT_SEARCH_CHECK_INTERVAL * * Specifies the interval in seconds for a child to check the trigger condition to perform a parent search. * * Applicable only if periodic parent search feature is enabled (see `OPENTHREAD_CONFIG_PARENT_SEARCH_ENABLE`). */ #ifdef OPENTHREAD_CONFIG_PARENT_SEARCH_CHECK_INTERVAL #error `OPENTHREAD_CONFIG_PARENT_SEARCH_CHECK_INTERVAL` is redefined. #endif #define OPENTHREAD_CONFIG_PARENT_SEARCH_CHECK_INTERVAL CONFIG_OPENTHREAD_PARENT_SEARCH_CHECK_INTERVAL_MINS * 60 /** * @def OPENTHREAD_CONFIG_PARENT_SEARCH_BACKOFF_INTERVAL * * Specifies the backoff interval in seconds for a child to not perform a parent search after triggering one. This is * used when device is an MTD child. * * Applicable only if periodic parent search feature is enabled (see `OPENTHREAD_CONFIG_PARENT_SEARCH_ENABLE`). */ #ifdef OPENTHREAD_CONFIG_PARENT_SEARCH_BACKOFF_INTERVAL #error `OPENTHREAD_CONFIG_PARENT_SEARCH_BACKOFF_INTERVAL` is redefined. #endif #define OPENTHREAD_CONFIG_PARENT_SEARCH_BACKOFF_INTERVAL CONFIG_OPENTHREAD_PARENT_SEARCH_BACKOFF_INTERVAL_MINS * 60 /** * @def OPENTHREAD_CONFIG_PARENT_SEARCH_RSS_THRESHOLD * * Specifies the RSS threshold used to trigger a parent search. * * Applicable only if periodic parent search feature is enabled (see `OPENTHREAD_CONFIG_PARENT_SEARCH_ENABLE`). */ #ifdef OPENTHREAD_CONFIG_PARENT_SEARCH_RSS_THRESHOLD #error `OPENTHREAD_CONFIG_PARENT_SEARCH_RSS_THRESHOLD` is redefined. #endif #define OPENTHREAD_CONFIG_PARENT_SEARCH_RSS_THRESHOLD CONFIG_OPENTHREAD_PARENT_SEARCH_RSS_THRESHOLD /** * @def OPENTHREAD_CONFIG_PARENT_SEARCH_RESELECT_TIMEOUT * * Specifies parent reselect timeout duration in seconds used on FTD child devices. When an attach attempt to a * neighboring router selected as a potential new parent fails, the same router cannot be selected again until this * timeout expires. * * Applicable only if periodic parent search feature is enabled (see `OPENTHREAD_CONFIG_PARENT_SEARCH_ENABLE`). */ #ifdef OPENTHREAD_CONFIG_PARENT_SEARCH_RESELECT_TIMEOUT #error `OPENTHREAD_CONFIG_PARENT_SEARCH_RESELECT_TIMEOUT` is redefined. #endif #define OPENTHREAD_CONFIG_PARENT_SEARCH_RESELECT_TIMEOUT CONFIG_OPENTHREAD_PARENT_SEARCH_RESELECT_TIMEOUT_MINS * 60 /** * @def OPENTHREAD_CONFIG_PARENT_SEARCH_RSS_MARGIN * * Specifies the RSS margin over the current parent RSS for allowing selection of a neighboring router as a potential * new parent to attach to. Used on FTD child devices. */ #ifdef OPENTHREAD_CONFIG_PARENT_SEARCH_RSS_MARGIN #error `OPENTHREAD_CONFIG_PARENT_SEARCH_RSS_MARGIN` is redefined. #endif #define OPENTHREAD_CONFIG_PARENT_SEARCH_RSS_MARGIN CONFIG_OPENTHREAD_PARENT_SEARCH_RSS_MARGIN /*----The following options set fixed default values but can be overridden by the user header file.----*/ #if CONFIG_OPENTHREAD_BORDER_ROUTER /** * @def OPENTHREAD_CONFIG_BORDER_AGENT_ID_ENABLE * * Define to 1 to enable Border Agent ID support. * */ #ifndef OPENTHREAD_CONFIG_BORDER_AGENT_ID_ENABLE #define OPENTHREAD_CONFIG_BORDER_AGENT_ID_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_BORDER_ROUTING_DHCP6_PD_ENABLE * * Define to 1 to enable Border Routing DHCPv6 PD. * */ #ifndef OPENTHREAD_CONFIG_BORDER_ROUTING_DHCP6_PD_ENABLE #define OPENTHREAD_CONFIG_BORDER_ROUTING_DHCP6_PD_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_BORDER_ROUTING_DHCP6_PD_CLIENT_ENABLE * * Define to 1 to enable Border Routing DHCPv6 client. * */ #ifndef OPENTHREAD_CONFIG_BORDER_ROUTING_DHCP6_PD_CLIENT_ENABLE #define OPENTHREAD_CONFIG_BORDER_ROUTING_DHCP6_PD_CLIENT_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_BORDER_ROUTING_DHCP6_PD_CLIENT_MIN_LIFETIME * * This parameter sets the minimum preferred lifetime (in seconds) for the Border Router's built-in OpenThread * DHCPv6 Prefix Delegation (PD) client feature. The default value is set to 30 to pass the certification case. */ #ifndef OPENTHREAD_CONFIG_BORDER_ROUTING_DHCP6_PD_CLIENT_MIN_LIFETIME #define OPENTHREAD_CONFIG_BORDER_ROUTING_DHCP6_PD_CLIENT_MIN_LIFETIME 30 #endif /** * @def OPENTHREAD_CONFIG_BORDER_ROUTING_ENABLE * * Define to 1 to enable Border Routing support. * */ #ifndef OPENTHREAD_CONFIG_BORDER_ROUTING_ENABLE #define OPENTHREAD_CONFIG_BORDER_ROUTING_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_PLATFORM_UDP_ENABLE * * Define to 1 to enable platform UDP support. * */ #ifndef OPENTHREAD_CONFIG_PLATFORM_UDP_ENABLE #define OPENTHREAD_CONFIG_PLATFORM_UDP_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_NAT64_BORDER_ROUTING_ENABLE * * Define to 1 to enable Border Routing NAT64 support. * */ #ifndef OPENTHREAD_CONFIG_NAT64_BORDER_ROUTING_ENABLE #define OPENTHREAD_CONFIG_NAT64_BORDER_ROUTING_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_SRP_SERVER_ENABLE * * Define to 1 to enable SRP Server support. * */ #ifndef OPENTHREAD_CONFIG_SRP_SERVER_ENABLE #define OPENTHREAD_CONFIG_SRP_SERVER_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_DNSSD_SERVER_ENABLE * * Define to 1 to enable DNS-SD Server support. * */ #ifndef OPENTHREAD_CONFIG_DNSSD_SERVER_ENABLE #define OPENTHREAD_CONFIG_DNSSD_SERVER_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_DNSSD_SERVER_BIND_UNSPECIFIED_NETIF * * Define to 1 to bind DNS-SD server to unspecified interface, 0 to bind to Thread interface. */ #ifndef OPENTHREAD_CONFIG_DNSSD_SERVER_BIND_UNSPECIFIED_NETIF #define OPENTHREAD_CONFIG_DNSSD_SERVER_BIND_UNSPECIFIED_NETIF 1 #endif /** * @def OPENTHREAD_CONFIG_DNS_UPSTREAM_QUERY_ENABLE * * Define to 1 to enable upstream forwarding support. * */ #ifndef OPENTHREAD_CONFIG_DNS_UPSTREAM_QUERY_ENABLE #define OPENTHREAD_CONFIG_DNS_UPSTREAM_QUERY_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_BACKBONE_ROUTER_ENABLE * * Define to 1 to enable Backbone Router support. * */ #ifndef OPENTHREAD_CONFIG_BACKBONE_ROUTER_ENABLE #define OPENTHREAD_CONFIG_BACKBONE_ROUTER_ENABLE 1 #endif #endif // CONFIG_OPENTHREAD_BORDER_ROUTER /** * @def OPENTHREAD_CONFIG_BORDER_ROUTER_ENABLE * * Define to 1 to enable Border Router support. * */ #ifndef OPENTHREAD_CONFIG_BORDER_ROUTER_ENABLE #define OPENTHREAD_CONFIG_BORDER_ROUTER_ENABLE 1 #endif #if (CONFIG_OPENTHREAD_RADIO_SPINEL_UART || CONFIG_OPENTHREAD_RADIO_SPINEL_SPI) /** * @def OPENTHREAD_SPINEL_CONFIG_COMPATIBILITY_ERROR_CALLBACK_ENABLE * * Enables compatibility error callback in Spinel */ #ifndef OPENTHREAD_SPINEL_CONFIG_COMPATIBILITY_ERROR_CALLBACK_ENABLE #define OPENTHREAD_SPINEL_CONFIG_COMPATIBILITY_ERROR_CALLBACK_ENABLE 1 #endif /** * @def OPENTHREAD_SPINEL_CONFIG_RCP_RESTORATION_MAX_COUNT * * Defines the max count of RCP failures allowed to be recovered. * 0 means to disable RCP failure recovering. * */ #ifndef OPENTHREAD_SPINEL_CONFIG_RCP_RESTORATION_MAX_COUNT #define OPENTHREAD_SPINEL_CONFIG_RCP_RESTORATION_MAX_COUNT 3 #endif /** * @def OPENTHREAD_POSIX_CONFIG_RCP_TIME_SYNC_INTERVAL * * This setting configures the interval (in units of microseconds) for host-rcp * time sync. The host will recalculate the time offset between host and RCP * every interval. * */ #ifndef OPENTHREAD_POSIX_CONFIG_RCP_TIME_SYNC_INTERVAL #define OPENTHREAD_POSIX_CONFIG_RCP_TIME_SYNC_INTERVAL (60 * 1000 * 1000) #endif /** * @def OPENTHREAD_SPINEL_CONFIG_COPROCESSOR_RESET_FAILURE_CALLBACK_ENABLE * * Enables co-processor reset failure callback in Spinel driver */ #ifndef OPENTHREAD_SPINEL_CONFIG_COPROCESSOR_RESET_FAILURE_CALLBACK_ENABLE #define OPENTHREAD_SPINEL_CONFIG_COPROCESSOR_RESET_FAILURE_CALLBACK_ENABLE 1 #endif #endif // CONFIG_OPENTHREAD_RADIO_SPINEL_UART || CONFIG_OPENTHREAD_RADIO_SPINEL_SPI #if CONFIG_OPENTHREAD_LINK_METRICS /** * @def OPENTHREAD_CONFIG_MLE_LINK_METRICS_SUBJECT_ENABLE * * Define as 1 to support Thread 1.2 Link Metrics Subject feature. * */ #ifndef OPENTHREAD_CONFIG_MLE_LINK_METRICS_SUBJECT_ENABLE #define OPENTHREAD_CONFIG_MLE_LINK_METRICS_SUBJECT_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_MLE_LINK_METRICS_INITIATOR_ENABLE * * Define as 1 to support Thread 1.2 Link Metrics feature. * */ #ifndef OPENTHREAD_CONFIG_MLE_LINK_METRICS_INITIATOR_ENABLE #define OPENTHREAD_CONFIG_MLE_LINK_METRICS_INITIATOR_ENABLE 1 #endif #endif //CONFIG_OPENTHREAD_LINK_METRICS /** * @def OPENTHREAD_CONFIG_ECDSA_ENABLE * * Define to 1 to enable ECDSA support. * */ #if CONFIG_OPENTHREAD_BORDER_ROUTER || CONFIG_OPENTHREAD_SRP_CLIENT #ifndef OPENTHREAD_CONFIG_ECDSA_ENABLE #define OPENTHREAD_CONFIG_ECDSA_ENABLE 1 #endif #endif /** * @def OPENTHREAD_CONFIG_DUA_ENABLE * * Define as 1 to support Thread 1.2 Domain Unicast Address feature. */ #ifndef OPENTHREAD_CONFIG_DUA_ENABLE #define OPENTHREAD_CONFIG_DUA_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_LOG_OUTPUT * * The ESP-IDF platform provides an otPlatLog() function. */ #ifndef OPENTHREAD_CONFIG_LOG_OUTPUT #define OPENTHREAD_CONFIG_LOG_OUTPUT OPENTHREAD_CONFIG_LOG_OUTPUT_PLATFORM_DEFINED #endif /** * @def OPENTHREAD_CONFIG_PLATFORM_ASSERT_MANAGEMENT * * The assert is managed by platform defined logic when this flag is set. * */ #ifndef OPENTHREAD_CONFIG_PLATFORM_ASSERT_MANAGEMENT #define OPENTHREAD_CONFIG_PLATFORM_ASSERT_MANAGEMENT 1 #endif /** * @def OPENTHREAD_CONFIG_COAP_API_ENABLE * * Define to 1 to enable the CoAP API. * */ #ifndef OPENTHREAD_CONFIG_COAP_API_ENABLE #define OPENTHREAD_CONFIG_COAP_API_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_PLATFORM_NETIF_ENABLE * * Define to 1 to enable platform NETIF support. * */ #ifndef OPENTHREAD_CONFIG_PLATFORM_NETIF_ENABLE #define OPENTHREAD_CONFIG_PLATFORM_NETIF_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE * * Enable the external heap. * */ #ifndef OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE #define OPENTHREAD_CONFIG_HEAP_EXTERNAL_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_TCP_ENABLE * * Define to 0 to disable TCP * */ #ifndef OPENTHREAD_CONFIG_TCP_ENABLE #define OPENTHREAD_CONFIG_TCP_ENABLE 0 #endif /** * @def OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE * * Define to 1 to enable Thread Test Harness reference device support. * */ #ifndef OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE #define OPENTHREAD_CONFIG_REFERENCE_DEVICE_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_DHCP6_CLIENT_ENABLE * * Define to 1 to enable DHCPv6 Client support. * */ #ifndef OPENTHREAD_CONFIG_DHCP6_CLIENT_ENABLE #define OPENTHREAD_CONFIG_DHCP6_CLIENT_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_DHCP6_SERVER_ENABLE * * Define to 1 to enable DHCPv6 Server support. * */ #ifndef OPENTHREAD_CONFIG_DHCP6_SERVER_ENABLE #define OPENTHREAD_CONFIG_DHCP6_SERVER_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_NCP_HDLC_ENABLE * * Define to 1 to enable NCP HDLC support. * */ #ifndef OPENTHREAD_CONFIG_NCP_HDLC_ENABLE #define OPENTHREAD_CONFIG_NCP_HDLC_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_TMF_NETDATA_SERVICE_ENABLE * * Define to 1 to support injecting Service entries into the Thread Network Data. * */ #ifndef OPENTHREAD_CONFIG_TMF_NETDATA_SERVICE_ENABLE #define OPENTHREAD_CONFIG_TMF_NETDATA_SERVICE_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS * * Define as 1 to enable bultin-mbedtls. * * Note that the OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS determines whether to use bultin-mbedtls as well as * whether to manage mbedTLS internally, such as memory allocation and debug. * */ #ifndef OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS #define OPENTHREAD_CONFIG_ENABLE_BUILTIN_MBEDTLS 0 #endif /** * @def OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE * * Define as 1 to enable support for adding of auto-configured SLAAC addresses by OpenThread. * */ #ifndef OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE #define OPENTHREAD_CONFIG_IP6_SLAAC_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_MAX_STATECHANGE_HANDLERS * * The maximum number of state-changed callback handlers (set using `otSetStateChangedCallback()`). * */ #ifndef OPENTHREAD_CONFIG_MAX_STATECHANGE_HANDLERS #define OPENTHREAD_CONFIG_MAX_STATECHANGE_HANDLERS 3 #endif /** * @def OPENTHREAD_CONFIG_PLATFORM_USEC_TIMER_ENABLE * * Define as 1 to enable microsecond timer. * */ #ifndef OPENTHREAD_CONFIG_PLATFORM_USEC_TIMER_ENABLE #define OPENTHREAD_CONFIG_PLATFORM_USEC_TIMER_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_PING_SENDER_ENABLE * * Define to 1 to enable ping sender module. * * Ping sender module implements sending ICMPv6 Echo Request messages and processing ICMPv6 Echo Reply messages. * */ #ifndef OPENTHREAD_CONFIG_PING_SENDER_ENABLE #define OPENTHREAD_CONFIG_PING_SENDER_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_MLR_ENABLE * * Define as 1 to support Thread 1.2 Multicast Listener Registration feature. * */ #ifndef OPENTHREAD_CONFIG_MLR_ENABLE #define OPENTHREAD_CONFIG_MLR_ENABLE 1 #endif /** * @def OPENTHREAD_CONFIG_DTLS_MAX_CONTENT_LEN * * The max length of the OpenThread dtls content buffer. * */ #ifndef OPENTHREAD_CONFIG_DTLS_MAX_CONTENT_LEN #define OPENTHREAD_CONFIG_DTLS_MAX_CONTENT_LEN 768 #endif /** * @def OPENTHREAD_CONFIG_MAC_CSL_REQUEST_AHEAD_US * * Define how many microseconds ahead should MAC deliver CSL frame to SubMac. * */ #ifndef OPENTHREAD_CONFIG_MAC_CSL_REQUEST_AHEAD_US #define OPENTHREAD_CONFIG_MAC_CSL_REQUEST_AHEAD_US (2 * 1000000 / CONFIG_FREERTOS_HZ) #endif /** * @def OPENTHREAD_CONFIG_CSL_RECEIVE_TIME_AHEAD * * Reception scheduling and ramp up time needed for the CSL receiver to be ready, in units of microseconds. * */ #ifndef OPENTHREAD_CONFIG_CSL_RECEIVE_TIME_AHEAD #define OPENTHREAD_CONFIG_CSL_RECEIVE_TIME_AHEAD (OPENTHREAD_CONFIG_MAC_CSL_REQUEST_AHEAD_US + 320) #endif /** * @def OPENTHREAD_CONFIG_MIN_RECEIVE_ON_AFTER * * Additional time for CSL receiver to remain in rx active after SFD has been received, in units of microseconds. * */ #ifndef OPENTHREAD_CONFIG_MIN_RECEIVE_ON_AFTER #define OPENTHREAD_CONFIG_MIN_RECEIVE_ON_AFTER 0 #endif /** * @def OPENTHREAD_CONFIG_OPERATIONAL_DATASET_AUTO_INIT * * Define as 1 to enable support for locally initializing an Active Operational Dataset. * */ #ifndef OPENTHREAD_CONFIG_OPERATIONAL_DATASET_AUTO_INIT #define OPENTHREAD_CONFIG_OPERATIONAL_DATASET_AUTO_INIT 1 #endif /** * @OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_MARK_ECN_INTERVAL * * Specifies the time-in-queue threshold interval in milliseconds to mark ECN on a message if it is ECN-capable or * drop the message if not ECN-capable. */ #ifndef OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_MARK_ECN_INTERVAL #define OPENTHREAD_CONFIG_DELAY_AWARE_QUEUE_MANAGEMENT_MARK_ECN_INTERVAL 1000 #endif #ifndef OPENTHREAD_CONFIG_THREAD_VERSION #define OPENTHREAD_CONFIG_THREAD_VERSION OT_THREAD_VERSION_1_4 #endif